The world’s largest swimming pool is as big as 15 football fields put together! If the staff at the San Alfonso del Mar resort can do proper pool care on that small ocean, anyone can take care of their residential pool.
If it’s your first time as a pool owner, you might find everything that goes into the upkeep intimidating. But we’ve got your back when it comes to first-time pool maintenance.
Keep reading and we’ll take you through our beginner’s guide to maintaining your pool.
Know Your Circulation and Filtration Systems
The pool pump is the most important part of your pool’s circulation system. Keep it running for 8-12 hours a day at least, and make note of any dead areas you see.
A dead area is where water has a hard time circulating. They tend to be by the wall skimmers, in corners, and by ladders.
Make sure to check and clean your filter regularly. Besides leaves and debris, calcium could build up and cause more trouble later.
Make note of what type of filter your pool came with. If you have a sand or a DE filter, you’ll have to wash them out. All you have to do with cartridge filters is replace them.
Have a Pool Cleaning Routine
Three essential pool cleaning tools are brushes, pole skimmers, and vacuums.
Make sure to brush your pool before vacuuming it. This loosens up debris and helps the vacuum do its job more efficiently.
If you have an automatic vacuum, you should still consider using a manual vacuum. An automatic vacuum can pick up a decent amount of debris from the pool floor, but it might have a hard time reaching corners.
Pole skimmers are for floating leaves and debris. You can skim while your vacuum is running to save some time.
Finally, nothing beats going for a swim. Swimming in your pool is a great way to make sure water circulates and keeps the pool clean.
Pool Care: Consider Resurfacing
If you’re a new pool owner in Texas, you might have inherited an old pool or a pool that didn’t get taken care of very well by its previous owners. In that case, it might be wise to look into pool resurfacing in Central Texas.
Fiberglass resurfacing reinforces the pool’s structure and can get rid of any cracks, stains, and algae left by the previous owners.
Glasscoat resurfacing adds a non-porous finish that’s corrosion and algae-resistant. These types of pools have longer lifespans and they’re easier to clean.
Taking Care of Your First Pool
Staying on top of pool care is easy. All you need to do is get familiar with your pool’s systems and develop a regular cleaning routine to ensure the water stays clean.
If you’re interested in either pool resurfacing in Austin, TX, or pool resurfacing in San Antonio, contact us today for a free quote!